Meridian America Link/Customer Controlled Routing - Manual (Page 316)

298 Chapter 12: Meridian 1 configuration for Meridian Link/CCR
553-3202-210 Standard October 1998
¥ A Meridian 1 with a single IPE Module or Application Module active
and a redundant Meridian Link (another IPE Module or Application
Module on warm standby mode):
Ñ VSID prompt (LD17) Enter a value to define the VAS ID to be
associated with the AML.
Ñ AML prompt (LD17) Enter the first ESDI or MSDL port number
to be associated with the VAS ID.
Ñ AML prompt (LD17) Enter the second ESDI or MSDL port
number to be associated with the VAS ID.
Ñ VSID prompt (LD15) Enter the value from the VSID prompt in
LD17.
Ñ VSID prompt (LD23) Enter the value from the VSID prompt in
LD17.
Ñ HSID prompt (LD23) Do not enter a value.
If you have a system with a single IPE Module or Application Module and
you want to add either Meridian Link or CCR to create a co-resident
system, you do not need to change the values entered at the VSID, HSID, or
AML prompts.
If you have a system with two modules, one of which has Meridian Link
(but not CCR) activated, the other of which has CCR (but not Meridian
Link) activated, and you want to create a co-resident system by removing
one module and activating both applications on the remaining module, you
must make changes to the values entered at the VSID, HSID, and AML
prompts. You should choose a configuration that requires the fewest
changes.