Meridian America Link/Customer Controlled Routing - Manual (Page 499)

Chapter 15: Link configuration 481
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Link 1ÑTCP/IP host link protocol (Meridian Link)
Link 1 is defined as the host link using the TCP/IP protocol if service 95 is
equipped, with the following characteristics (which are described in more
detail later in this chapter):
Protocol: LAN Link type: 2
Machine ID: Lanlink
Delay: 0
Port: 3000
If your Meridian Link application requirements are satisfied by the default
configuration, no more procedures are required. You may choose to verify
the status of the link using Procedure 12: Verifying the link status, in this
chapter.
Link 2ÑMeridian Mail Link (optional for Meridian Link)
Link 2 is defined as the Meridian Mail Link (MML) with the following
characteristics.
Protocol: ASYNC Link type: 3
Machine ID: MeridianMail
Delay: 0
TTY: 3
If your link requirements are satisfied by the default configuration, no more
procedures are required. You may choose to verify the status of the link
using Procedure 12: Verifying the link status, in this chapter.