Procedure 10: verify the installation – Meridian America Link/Customer Controlled Routing User Manual
Page 493
Chapter 14: Software installation, upgrade, and update procedures 475
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Procedure 10: Verify the installation
This procedure assumes that you have
¥
loaded the operating system (using Procedure 5 or 6)
¥
rebooted the operating system (using Procedure 7)
¥
loaded the application tape (using Procedure 8)
¥
restored the Release 2 configuration files and data files (using
Procedure 9)
This procedure verifies that Meridian Link Release 5C and CCR Release 3C
have been installed completely and correctly.
1
At the ÒConsole Login:Ó prompt, type maint and press [Return].
2
You are prompted for a password. Type the password and press
[Return]. The default password is maint.
3
At the Òmaint>Ó prompt, type fileverif and press [Return].
Messages appear as shown in Figure 256.
Figure 256
File verification messages
FILE VERIFICATION AS OF 09/20/93 12:13:01
................................................................
................................................................
................................................................
................................................................
................................................................
Static file verification found everything to be in order.
................................................................
................................................................
................................................................
................................................................
................................................................
Permissions and ownership tests found everything in order.
Structural verification found maint data files to be in order.
4
Type exit and press [Return] to go to the ÒConsole Login:Ó prompt.
Meridian Link and CCR have now been installed and verified.