Meridian America Link/Customer Controlled Routing - Manual (Page 438)

420 Chapter 14: Software installation, upgrade, and update procedures
553-3202-210 Standard October 1998
Procedure 5: Load the operating system tape on an Application Module
with an MVME147 card (continued)
ATTENTION
During the installation or start-up of BOS, different characters than
usual represent the character delete, line delete, and interrupt functions.
During these operations,
¥ character delete (backspace), usually [Control-h], is [#]
¥ line delete, usually [Control-u], is [@]
¥ interrupt, usually [Control-c], is Delete
If you make a mistake entering the date, use [#] to delete characters.
If you press [Delete], a Т#У prompt appears; press [Control-d] to return
to where you were.
19 You are prompted to confirm the date you entered. Type y and press
[Return] if the date is correct.
If the date is not correct, type n and press [Return]. You are then
prompted to enter each value.
When you enter the date successfully and respond y to the prompt,
the BOS software management menu appears.
Figure 155
BOS software management menu
The BOS (FE03.71) Software Management Menu
1 install Install FE03.71 BOS Software
2 upgrade Upgrade To FE03.71 BOS Software
---> Enter a number, a name, the initial part of name, or
? or <number>? for HELP, q to QUIT: