Meridian America Link/Customer Controlled Routing - Manual (Page 332)

314 Chapter 12: Meridian 1 configuration for Meridian Link/CCR
553-3202-210 Standard October 1998
Table 110
LD 48ÑLink Diagnostic (continued)
Command Comment
ENIT
MSGI/MSGO xx
<l> <s> <c> <u> Enable inclusive message input/output monitoring
of only those messages with specified TN
(xx=link)
DSIT
MSGI/MSGO xx Disable inclusive TN message monitoring on link
xx
DIS AML xx aaa Disable link xx or option xxx. See options above.
EST AML xx Connect link xx
RLS AML xx Disconnect link xx
STAT AML Query status of all ESDI/MSDL links
STAT AML xx Query status of link xx
SLFT AML xx Perform self-test on link xx
SWCH AML i j Switch the active link i over to standby link j
MAP AML xx Display mapping of AML to card and port numbers
UPLD AML xx
TBL1 Display maintenance error log table for link xx
(link must be enabled)
UPLD AML xx
TBL2 Display download parameters for link xx (link must
be enabled)
UPLD AML xx
TBL3 Display protocol error table for link xx (link must
be enabled)
UPLD AML xx
TBL4 Display traffic log table for link xx (link must be
enabled)
Ñ end С