Meridian America Link/Customer Controlled Routing - Manual (Page 289)

Chapter 10: Installing peripheral devices 271
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
LaserJet series IV printer switch settings
Use the [Menu] key on the front panel to check and set the options. Press
the [Menu] key to access the first group of settings. Hold the [Menu] key
down for about five seconds (the printer is offline) to access the second
group of settings. Press the + or Ð (minus) key until the correct setting
appears to change an option. Press [Enter]/[Reset Menu] to save a selection.
Press the [Menu] key to continue. Press the [Online] key to exit from the
menu.
Table 101 shows the correct option settings for use with CCR.
Table 101
LaserJet series IV printer switch settings
Press [Menu] key to see the
Printing Menu
Press [Menu] key once to see
the PCL Menu
COPIES = 01
PAPER = LETTER
ORIENTATION = P
FORM = 66
MANUAL FEED = OFF
RET = DARK
FONT SOURCE = 1
FONT NUMBER = 45
SYM SET = ISO L1
PAGEPROTECT = OFF
RESOLUTION = 300
TIMEOUT = 15
Press [Menu] key twice to see
the Configuration Menu
Press [Menu] key three times to
see the Printing Menu
MP TRAY = CLASS
LOCK = NONE
CLR WARN = ON
AUTO CONT = ON
DENSITY = 3
LOW TONER = ON
SERIAL = RS-232
PACING = XON/XOFF
BAUD RATE = 9600
ROBUST XON = ON
DTR POLARITY = HI