Lenze 8400 BaseLine D - Manual (Page 114)

6 I/O terminals
6.2 Analog terminals
114
Lenze · 8400 BaseLine D · Reference manual · DMS 5.5 EN · 01/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Minimum and maximum output speed
The speed range required for the application results from the selected reference speed (
C011 ) and
the minimum analog setpoint ( C010 ):
• The reference speed set in C011 is reached at a speed setpoint selection of 100 %.
• All speed setpoint selections are provided in % and always refer to the reference speed set in
C011 (independent of the setpoint source).
• The speed set in C010 corresponds to the minimum speed if the speed setpoint has been selec-
ted via the analog input (Lenze setting) and a voltage of 0 V is applied to the X4/A1U input ter-
minal.
[6-1] Relation between the selected setpoint and minimum and maximum output speed
0 V
n
10 V
100 % = C00011
C00010