Lenze 8400 BaseLine D - Manual (Page 69)

Lenze · 8400 BaseLine D · Reference manual · DMS 5.5 EN · 01/2014 · TD05
69
5 Motor control (MCTRL)
5.1 Motor selection/Motor data
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.1.1 Selecting a motor from the motor catalogue in the »Engineer«
If a checkmark is set in the Motor control field in the "Other components" dialog when the controller
is inserted into the project, the motor for the controller can be selected from the motor catalogue in
another dialog:
• Alternatively, the motor can be inserted into the project at a later time via the Insert a
component command.
• Go to the Application parameters tab in the Overview  Motor data dialog level and click the
From motor catalogue... button to also reach the motor catalogue for the selection of another
motor.