Lenze 8400 BaseLine D - Manual (Page 70)

5 Motor control (MCTRL)
5.1 Motor selection/Motor data
70
Lenze · 8400 BaseLine D · Reference manual · DMS 5.5 EN · 01/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Accepting the default values of the motor
If a motor is selected from the motor catalogue at a later time, the Use motor's default values dialog
box is displayed afterwards which includes all motor data of the selected motor. Please select here
which of the default values are to be copied to the controller:

Tip!
If a third party manufacturer's motor is used, select a Lenze motor from the motor cata-
logue first which is similar in terms of current, voltage and speed rating. Adapt the prese-
lected motor data exactly to the real motor afterwards.