Ce requirements (system with lim) – Rockwell Automation 2093-xxxx Kinetix 2000 Multi-axis Servo Drive User Manual User Manual
Page 18
Advertising
Publication 2093-UM001A-EN-P — March 2007
18
Start
CE Requirements (System with LIM)
To meet CE requirements when your Kinetix 2000 system includes the line
interface module (LIM), follow all the requirements as stated in CE
Requirements (System without LIM), and these additional requirements as
they apply to the ac line filter.
• Install the LIM (2094-AL09) as close to the integrated axis module
(IAM) as possible.
• Install the LIM (2094-ALxxS, -or -XL75S-Cx) with the line filter
(2090-XXLF-xxxx) as close to the IAM as possible.
When the LIM (2094-ALxxS, or -XL75S-Cx) supports two IAMs, each
IAM requires an ac line filter installed as close to the IAM as possible.
Advertising