Rockwell Automation 2093-xxxx Kinetix 2000 Multi-axis Servo Drive User Manual - Manual (Page 199)

Publication 2093-UM001A-EN-P — March 2007
Upgrading Firmware 199
16. Expand 1203-SSS in the device workspace. Double-click on the Linear
List to view the 1203-SSS or Anacanda listing both baud rate and
revisions.
Go to Help in Drive Executive to scan for information such as Linear List
or Parameter listing. Breakdown of the functions listed are as follows:
Each parameter includes these functions.
Column Description of Contents
# Parameter number
Parameter Name Short name of the parameter
Value Current value of the parameter
Units
Units describes the measurement units for this parameter.
For example, Volts and Amps.
Internal Value
Internal values are unscaled values used by the device and by controllers
that communicate with the device. The information in this field provides the
scaling information to calculate the internal value from a scaled value.
Source Parameter Displays the source parameter, if any.
Comment Displays comments previously entered.
Min The minimum value is the lowest possible value for this parameter.
Max The maximum value is the highest possible value for this parameter.
Alias Displays an alias, or alternative name, previously entered.
The following columns do not appear by default, but can be made available through View Options.
Internal Default The default value expressed in internal units.
Internal Min The minimum value expressed in internal units.
Internal Max The maximum value expressed in internal units.