Rockwell Automation 2093-xxxx Kinetix 2000 Multi-axis Servo Drive User Manual - Manual (Page 198)

Publication 2093-UM001A-EN-P — March 2007
198 Upgrading Firmware
14. Successful uploading of the Kinetix 2000 parameters results in the
following screen.
15. Expand node x: 2093 SERVO in the device workspace, and double click
on the Linear List. Linear List contains one IAM and five other axes.
The same parameters as Drive Explorer, but in a slightly different
format.
IMPORTANT
The parameters in Drive Executive are read/write, and
may be saved as an extension dno file.