Rockwell Automation 2093-xxxx Kinetix 2000 Multi-axis Servo Drive User Manual User Manual
Page 214
Advertising
Publication 2093-UM001A-EN-P — March 2007
214
DC Common Bus Applications
DriveExplorer software will read your system.
3. Observe the Linear List of parameters as grouped by Node, Port, and
Axis hierarchy as shown below.
4. Select the appropriate Devices\Node\Product\ path and navigate to
the N:P:x599 Add Bus Cap parameter as shown.
5. Double-click the N:P:x599 Add Bus Cap parameter.
The command dialog for parameter x599 - Add Bus Cap opens.
N: P.
x xxx
Network Node Number
DPI Port Number
Parameter Number
30 = Version Data
Linear List Legend
Axis Number
0 = IAM (axis 1)
1 = AM (axis 2)
2 = AM (axis 3)
3 = AM (axis 4)
Advertising