Enabling band navigation for an ap, Configuring band navigation parameters – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 130
118
Step Command
Remarks
3.
Enable band navigation
globally.
band-navigation enable
By default, band navigation is
disabled globally.
Band navigation takes effect for the
specified AP only when band
navigation is enabled both
globally and for the AP.
Enabling band navigation for an AP
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter AP template view.
wlan ap ap-name [ model
model-name [ id ap-id ] ]
N/A
3.
Enable band navigation for
the AP.
band-navigation enable
By default, band navigation is
enabled for an AP.
Band navigation takes effect for an
AP only when band navigation is
enabled both globally and for the
AP.
Configuring band navigation parameters
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter RRM view.
wlan rrm N/A
3.
Configure load balancing
session threshold and session
gap.
band-navigation balance session
session [ gap gap ]
Optional.
By default, the band navigation
load balancing function is
disabled.
4.
Configure the maximum
denial count of association
requests sent by a 5 GHz-
client.
band-navigation balance
access-denial access-denial
Optional.
By default, association requests
sent by a 5 GHz-capable client are
not denied.
5.
Configure the client RSSI
threshold.
band-navigation rssi-threshold
rssi-threshold
Optional.
The default RSSI threshold is 15.