Configuring rogue device detection, Configuring detection rules – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 152
140
Step Command
Remarks
3.
Configure the AP operating
mode as monitor.
work-mode monitor
N/A
Use either command.
By default, the AP operating mode
is normal.
•
When an AP has its operating
mode changed from normal to
monitor, it does not restart.
•
When an AP has its operating
mode changed from monitor to
normal, it restarts.
4.
Configure the AP operating
mode as hybrid.
device-detection enable
NOTE:
•
If the AP operates in hybrid mode, configure a service template so the AP can provide WLAN service
when scanning devices.
•
If the AP operates in monitor mode, the AP cannot provide WLAN service, and you do not need to
configure a service template.
Configuring rogue device detection
Configuring rogue device detection
Configuring detection rules
Configuring detection rules is to configure rogue device classification rules. An AC classifies devices as
either rogues or friends based on the configured classification rules.
•
Check whether an AP is a rogue.