Configuring psk authentication, Configuring 802.1x authentication, Configuring mac authentication – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 73: Configuring psk and mac authentication
61
2.
Enable port security.
Configuring PSK authentication
Step Command
Remarks
1.
Enter system view..
system-view
N/A
2.
Enter WLAN-ESS interface
view.
interface wlan-ess
interface-number
N/A
3.
Enable 802.11 key
negotiation.
port-security tx-key-type 11key
Not enabled by default.
4.
Configure the pre-shared key.
port-security preshared-key
{ pass-phrase | raw-key } [ cipher
| simple ] key
Not configured by default.
5.
Enable the PSK port security
mode.
port-security port-mode psk
N/A
Configuring 802.1X authentication
Step Command
1.
Enter system view.
system-view
2.
Enter WLAN-ESS interface view.
interface wlan-ess interface-number
3.
Enable the 802.1X port security mode.
port-security port-mode { userlogin-secure |
userlogin-secure-ext }
Configuring MAC authentication
Step Command
1.
Enter system view.
system-view
2.
Enter WLAN-ESS interface view.
interface wlan-ess interface-number
3.
Enable MAC port security mode.
port-security port-mode mac-authentication
NOTE:
802.11i does not support MAC authentication.
Configuring PSK and MAC authentication
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter WLAN-ESS interface
view.
interface wlan-ess
interface-number
N/A
3.
Enable 802.11 key
negotiation.
port-security tx-key-type 11key
Not enabled by default.
4.
Enable the PSK and MAC port
security mode.
port-security port-mode
mac-and-psk
N/A