Protocols and standards, Configuring wlan service, Configuration task list – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 24: Enabling wlan service, Configuring country code
12
Protocols and standards
•
ANSI/IEEE Std 802.11, 1999 Edition
•
IEEE Std 802.11a
•
IEEE Std 802.11b
•
IEEE Std 802.11g
•
IEEE Std 802.11i
•
IEEE Std 802.11-2004
•
IEEE Std 802.11n
Configuring WLAN service
Configuration task list
Task Description
Required
Required
Configuring software automatic update
Optional
Configuring a WLAN service template
Required
Required
Optional
Configuring basic network parameters for an AP
Optional
Configuring AC-AP tunnel dual-link
Optional
Required
Required
Optional
Enabling WLAN service
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enable WLAN service.
wlan enable
By default, WLAN service is
enabled.
Configuring country code
A country code identifies the country in which you want to operate radios. It determines characteristics
such as operating power level and total number of channels available for the transmission of frames. You
must set the valid country code or area code before configuring an AP.