H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 91)

79
# Create service template 1 of crypto type, configure its SSID as dot1x, and enable dynamic WEP
encryption.
[AC] wlan service-template 1 crypto
[AC-wlan-st-1] ssid dot1x
[AC-wlan-st-1] wep mode dynamic
[AC-wlan-st-1] authentication-method open-system
[AC-wlan-st-1] bind WLAN-ESS 1
[AC-wlan-st-1] service-template enable
[AC-wlan-st-1] quit
# Create an AP template named ap1, and specify its model as WA2100, and serial ID as
210235A29G007C000020.
[AC] wlan ap ap1 model WA2100
[AC-wlan-ap-ap1] serial-id 210235A29G007C000020
# Bind service template 1 to radio 1.
[AC-wlan-ap-ap1] radio 1 type dot11g
[AC-wlan-ap-ap1-radio-1] service-template 1
[AC-wlan-ap-ap1-radio-1] radio enable
2. Configure the RADIUS server (IMCv3):
See "
Configure the RADIUS server (IMCv3): ."
3. Configure the RADIUS server (IMCv5):
See "
Configure the RADIUS server (IMCv5): ."
4. Configure the wireless card:
a. Double click the icon at the bottom right corner of your desktop.
The Wireless Network Connection Status window appears.
b. Click the Properties button on the General tab.
The Wireless Network Connection Properties window appears.
c. On the Wireless Networks tab, select wireless network with the SSID dot1x, and then click
Properties.
The dot1x Properties window appears.
d. On the Authentication tab, select Protected EAP (PEAP) from the EAP type list, and click
Properties.
e. On the popup window, clear Validate server certificate, and click Configure.
f. In the popup dialog box, clear Automatically use my Windows logon name and password
(and domain if any).
The configuration procedure is as shown in
Figure 48 through Figure 50 .