Protocols and standards, Configuring wlan security, Configuration task list – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 67: Enabling an authentication method
55
NOTE:
For more information about access authentication, see
Security Configuration Guide.
Protocols and standards
•
IEEE Standard for Information technology—Telecommunications and information exchange
between systems— Local and metropolitan area networks— Specific requirements -2004
•
Wi-Fi Protected Access—Enhanced Security Implementation Based On IEEE P802.11i Standard-Aug
2004
•
Information technology—Telecommunications and information exchange between systems—Local
and metropolitan area networks—Specific requirements—802.11, 1999
•
IEEE Standard for Local and metropolitan area networks "Port-Based Network Access Control"
802.1X™- 2004
•
802.11i IEEE Standard for Information technology—Telecommunications and information exchange
between systems—Local and metropolitan area networks—Specific requirements
Configuring WLAN security
Configuration task list
To configure WLAN security in a service template, map the service template to a radio policy, and add
radios to the radio policy. The SSID name, advertisement setting (beaconing), and encryption settings
are configured in the service template. You can configure an SSID to support any combination of WPA,
RSN, and Pre-RSN clients
Complete these tasks to configure WLAN security:
Task Remarks
Enabling an authentication method
Required
Optional
Configuring the GTK rekey method
Optional
Required
Required
Optional
Enabling an authentication method
You can enable open system or shared key authentication or both.
To enable an authentication method:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter WLAN service
template view.
wlan service-template
service-template-number crypto
N/A