H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 35)

23
Configuring a radio policy
You can configure radio parameters in a radio policy and apply the radio policy on a radio so that the
radio uses the parameters in the policy.
To configure a radio policy:
Step Command Remarks
1. Enter system view. system-view N/A
2. Create a radio policy and
enter radio policy view.
wlan radio-policy policy-name N/A
3. Set the interval for sending
beacon frames.
beacon-interval interval
Optional.
By default, the beacon interval is
100 time units (TUs).
4. Set the number of beacon
intervals between DTIM
frames.
dtim counter
Optional.
By default, the DTIM counter is 1.
5. Specify the maximum length
of packets that can be
transmitted without
fragmentation.
fragment-threshold size
Optional.
By default, the fragment threshold
is 2346 bytes.
The threshold must be an even
number.
6. Specify the request to send
(RTS) threshold length.
rts-threshold size
Optional.
By default, the RTS threshold is
2346 bytes.
7. Set the maximum number of
retransmission attempts for
frames larger than the RTS
threshold.
long-retry threshold count
Optional.
By default, the long retry
threshold is 4.
8. Specify the maximum
number of attempts to
transmit a frame shorter than
the RTS threshold.
short-retry threshold count
Optional.
By default, the short retry
threshold is 7.
9. Specify the maximum
interval for the AP to hold
received packets. max-rx-duration interval
Optional.
By default, the interval is 2000
milliseconds.
10. Specify the maximum
number of associated clients. client max-count max-number Optional.
The default is 64.
11. Specify a collision
avoidance mechanism.
protection-mode { cts-to-self | rts-cts }
By default, the collision
avoidance mechanism is
RTS/CTS.
Enabling automatic creation of radio policies
After you enable automatic creation of radio policies, a radio policy is automatically created and bound
to each radio of a newly created AP template.
To enable automatic creation of radio policies: