H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 43)

31
Step Command Remarks
4. Configure a description for
the AP group.
description string
Optional.
By default, no description is
configured for the AP group.
Applying the AP group in a user profile
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter user profile view. user-profile profile-name
If the user profile does not exist,
you need to create it first.
3. Apply the AP group in the
user profile.
wlan permit-ap-group value
No AP group is applied in the
user profile by default.
4. Return to system view. quit N/A
5. Enable the user profile. user-profile profile-name enable
Not enabled by default.
Note that:
The name of the user profile must
be identical to that of the external
group on the RADIUS server.
To support roaming, all ACs in a
mobility group must have the
same profile name configured.
NOTE:
For more information about user profile, see Security Configuration Guide.
Displaying and maintaining AP group
Task Command Remarks
Display AP group information.
display wlan ap-group [ group-id ] [ | { begin
| exclude | include } regular-expression ]
Available in any view
Configuring SSID-based access control
When a user wants to access a WLAN temporarily, the administrator can specify a permitted SSID in the
corresponding user profile so that the user can access the WLAN only through the SSID.
After completing the configuration, the user profile needs to be enabled to take effect.
To specify a permitted SSID:
Step Command Remarks
1. Enter system view. system-view N/A