H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 139)

127
<AC> system-view
[AC] interface wlan-ess 1
[AC-WLAN-ESS1] quit
# Create service template 1 of clear type, configure its SSID as rrm-adjust, and bind WLAN-ESS1 to the
service template.
[AC] wlan service-template 1 clear
[AC-wlan-st-1] ssid rrm-adjust
[AC-wlan-st-1] bind wlan-ess 1
[AC-wlan-st-1] authentication-method open-system
[AC-wlan-st-1] service-template enable
[AC-wlan-st-1] quit
# Create an AP template named ap1, and specify its model as WA2100, and serial ID as
210235A045B05B1236548.
[AC] wlan ap ap1 model WA2100
[AC-wlan-ap-ap1] serial-id 210235A045B05B1236548
[AC-wlan-ap-ap1] radio 1 type dot11g
# Bind service template 1 to radio 1 of AP 1.
[AC-wlan-ap-ap1-radio-1] service-template 1
[AC-wlan-ap-ap1-radio-1] radio enable
[AC-wlan-ap-ap1-radio-1] quit
[AC-wlan-ap-ap1] quit
# Configurations of other APs are similar to AP1, and are omitted.
# Enable auto DFS and auto TPC.
[AC] wlan rrm
[AC-wlan-rrm] dot11bg calibrate-channel self-decisive
[AC-wlan-rrm] dot11bg calibrate-power self-decisive
# Configure auto DFS trigger parameters (Optional because the parameters has default values).
[AC-wlan-rrm] dot11bg crc-error-threshold 20
[AC-wlan-rrm] dot11bg interference-threshold 50
[AC-wlan-rrm] dot11bg tolerance-level 20
# Configure the auto TPC trigger parameter adjacency factor (Optional because the parameter has a
default value by default).
[AC-wlan-rrm] dot11bg adjacency-factor 3
[AC-wlan-rrm] quit
# Create radio group 1.
[AC] wlan rrm-calibration-group 1
# Add radio 1 of AP 1 and radio 1 of AP 2 to the radio group.
[AC-wlan-rc-group-1] ap ap1 radio 1
[AC-wlan-rc-group-1] ap ap2 radio 1
# Set the channel holddown time to 20 minutes.
[AC-wlan-rc-group-1] channel holddown-time 20
# Set the power holddown time to 30 minutes.
[AC-wlan-rc-group-1] power holddown-time 30