H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 208)

196
Figure 98 Network diagram
Configuration procedure
1. Configure the AE:
{
Configure the IP addresses of AP 1, AP 2, and AP 3 on the AE, or select broadcast for the AE
to discover APs.
{
Perform configuration related to wireless location on the AE.
2. Configure AP 1 to operate in monitor mode:
On the AC, configure AP 1, AP 2, and AP 3 to operate in monitor mode. AP 1, AP 2, and AP 3
are configured similarly, and this section only describes how to configure AP 1 for illustration.
# Create AP 1.
<AC> system-view
[AC] wlan ap ap1 model WA2220-AG
# Specify the serial ID for the AP.
[AC-wlan-ap-ap1] serial-id 210235A29G007C000020
# Configure the AP to operate in monitor mode.
[AC-wlan-ap-ap1] work-mode monitor
# Enable the radio.
[AC-wlan-ap-ap1] radio 1
[AC-wlan-ap-ap1-radio-1] radio enable
[AC-wlan-ap-ap1-radio-1] return
# Enable wireless location.
<AC> system-view
[AC] wlan rfid-tracking enable
# Configure the wireless location mode.
[AC] wlan ap ap1
[AC-wlan-ap-ap1] radio 1
[AC-wlan-ap-ap1-radio-1] rfid-tracking mode all
[AC-wlan-ap-ap1-radio-1] return
3. Verify the configuration:
# Display wireless location radio information.
<AC> display wlan rfid-tracking radio