H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 78)

66
f. Select LAN Access Service for Service Type.
g. Select H3C for Access Device Type.
h. Select or manually add an access device with the IP address 10.18.1.1.
Figure 31 Adding access device
# Add service.
a. Click the Service tab, and then select Access Service > Access Device from the navigation tree
to enter the add service page.
b. Click Add on the page to enter the following configuration page.
c. Set the service name to mac, and the others keep the default values.
Figure 32 Adding service
# Add account.
a. Click the User tab, and then select User > All Access Users from the navigation tree to enter the
user page.
b. Click Add on the page to enter the page shown in Figure 33 .
c. Enter a username 00146c8a43ff.
d. Add an account and password 00146c8a43ff.
e. Select the service mac.