H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 220)

208
Figure 101 Configuring the multicast rate
5. Disable buffering of multicast and broadcast packets:
[AC] undo wlan option broadcast-buffer enable
Optimizing an 802.11n WLAN
Network requirements
As shown in Figure 102 , all the clients and APs get their IP addresses from the DHCP server. Client 1 using
802.11n associates with AP 1, and Client 2 using 802.11g associates with AP 2.
Enable 802.11n packet suppression and enable traffic shaping based on link status so that Client 1 does
not affect Client 2.
Figure 102 Network diagram
L2 Switch
AC
10.10.1.1/24
DHCP server
10.10.1.2/24
AP 1
AP 2
Client 2
Client 1