Configuration guidelines – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 209
197
WLAN RFID Tracking
--------------------------------------------------------------------------------
AP Radio Mode
--------------------------------------------------------------------------------
ap1 1 MU/Tag
ap1 2 N/A
--------------------------------------------------------------------------------
# You can view the location information of the rogue AP, APs, and clients by maps, forms or
reports provided by the graphics software.
Configuration guidelines
•
To implement wireless location, configure at least three APs to operate in monitor or hybrid mode.
•
An AP monitors clients on different channels periodically. If the Tag message sending interval is
configured as 1 second, the AP scans and reports Tag messages every half a minute. If higher
location efficiency is required, you can set the Tag sending interval to the smallest value, 124
milliseconds on the AE.