H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 71
59
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter WLAN service
template view.
wlan service-template
service-template-number crypto
N/A
3.
Enable the WEP cipher
suite.
cipher-suite { wep40 | wep104 |
wep128 } *
By default, no cipher suite is
selected.
4.
Configure the WEP default
key.
wep default-key { 1 | 2 | 3 | 4 }
{ wep40 | wep104 | wep128 }
{ pass-phrase | raw-key } [ cipher |
simple ] key
By default, the WEP default key
index number is 1.
5.
Specify a key index
number.
wep key-id { 1 | 2 | 3 | 4 }
Optional.
The default is 1.
2.
Configure dynamic WEP encryption
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter WLAN service
template view.
wlan service-template
service-template-number crypto
N/A
3.
Enable dynamic WEP
encryption.
wep mode dynamic
By default, static WEP encryption is
adopted.
Dynamic WEP encryption must be
used together with 802.1X
authentication.
4.
Enable the WEP cipher
suite.
cipher-suite { wep40 | wep104 |
wep128 }
Optional.
With dynamic WEP encryption
configured, the device automatically
uses the WEP 104 cipher suite. To
change the encryption method, use
the cipher-suite command.
5.
Configure the WEP default
key.
wep default-key { 1 | 2 | 3 | 4 }
{ wep40 | wep104 | wep128 }
{ pass-phrase | raw-key } [ cipher
| simple ] key
Optional.
No WEP default key is configured by
default.
If the WEP default key is configured,
the WEP default key is used to
encrypt multicast frames. If not, the
device randomly generates a
multicast WEP key.
6.
Specify a key index
number.
wep key-id { 1 | 2 | 3 }
Optional.
By default, the key index number is 1.
For dynamic WEP encryption, the
WEP key ID cannot be configured as
4.