INFICON MDC-370 Thin Film Deposition Controller - Manual (Page 165)

MDC-370 DEPOSITION CONTROLLER
power through the Remote Power
Handset. b) Controller is in Abort mode.
c) Faulty Remote Power Handset.
d) Bad connection from the Manual
Control connector to the Main bd.
Faulty DAC outputs. a) Improper DAC wiring.
b) External recording device puts
excessive load on the DAC.
For further assistance, call (562) 906-1515.
12.4 RETURNING THE MDC-370 TO THE FACTORY
If there is a need to return your controller to the factory, please call Maxtek to
obtain a Returned Merchandise Authorization Number (RMA#). This number is
required prior to returning your controller to the factory. You are required to
show this RMA number on your shipping document. It will help us track and
ensure proper actions will be made to your controller.
REPAIR AND MAINTENANCE 12-3