Rockwell Automation 1756-DMF30 ControlLogix Drive Module - Manual (Page 124)

Publication 1756-UM522B-EN-P - February 2003
B-44 1756-DMD30 Specific Information
155 Logic Status
Displays the status - condition of the drive. If there is a
Controller to Drive Module error or inhibit, the data in the
LogicStatus word of the Controller Communication Format will
be set to 0x0000ffff. Bit 15 [Reserved] was used in AutoGen to
detect loss of connection. This parameter is linked to the
LogicStatus word of the Controller Communication Format via
parameter 632 [Integer Out00]. Default: 0000 0000 0000 0000 0000 0000 0000 0000
Options: Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
Bit 16
Bit 17
Bit 18
Bit 19
Bit 20
Bit 21
Bit 22
Bit 23
Bit 24
Bit 25
Bit 26
Bit 27
Bit 28
Bit 29
Bit 30
Bit 31 Enabled
Running
Command Dir
Actual Dir
Accelerating
Decelerating
Jogging
Faulted
Alarm
Flash Mode
Run Ready
At Limit
Tach Loss Sw
At Zero Spd
At Setpt Spd
Reserved
At Setpt 1
Above Setpt2
MC En Ack
MC Commis
Spd Commis
Reserved
Torque Mode
Speed Mode
PositionMode
Start Active
Command Run
Reserved
Reserved
Reserved
FieldCurr On
Reserved
File:
Group: Monitor
Control Status
No. Name
Description Values