Rockwell Automation 1756-DMF30 ControlLogix Drive Module - Manual (Page 251)

Publication 1756-UM522B-EN-P - February 2003
1756-DMD30 Specific Information B-171
9 F Par NotLod Field configuration parameters have not been downloaded
into the PMI module from the Dive Module.
10 F Gns NotLod Field configuration parameters have not been downloaded
into the PMI module from the Dive Module.
11 F Flt Rst Rq Previous field faults (parameter 2122 [MC Faults]), e.g., field
loss and line synchronization loss faults, have not been
cleared.
14 F FB or CFG A field current feedback fault or configuration error has
occured:
• The drive has sensed field current feedback when
the field is off.
• You have attempted to turn on the field without
setting parameter 2200 [PMI Drive Config] bit 12 [Fld
Reg Used].
Bit Fault Name Fault Description