Rockwell Automation 1756-DMF30 ControlLogix Drive Module - Manual (Page 52)

Publication 1756-UM522B-EN-P - February 2003
5-8 Configuring the Drive Module
Updating the DriveExecutive Database
There are two ways to obtain the desired database if your computer
does not contain it.
•
Connecting to the module and creating the database in
DriveExecutive
•
Downloading the database from the DriveTools 2000 software
website (
http://www.ab.com/drives/drivetools_2000 )
If you have access to a Drive module with the desired firmware
revision, DriveExecutive can read the database from the module.
From here, DriveExecutive and RSLinx will guide you to connect the
Drive module and create the database.
Select Create Database
from Drive Menu