Rockwell Automation 1756-DMF30 ControlLogix Drive Module - Manual (Page 15)

1 Publication 1756-UM522B-EN-P - February 2003
Chapter
1
What is the ControlLogix Drive Module?
This chapter describes the ControlLogix Drive module. It also
describes what you must know and do before using the Drive
module.
What is the ControlLogix
Drive Module? The 1756-DM Drive Module is a single slot ControlLogix based
module for interface to Reliance Electric Distributed Power System
(DPS) drive equipment. Each drive module interfaces with an
individual Power Module Interface (PMI) chassis, performing velocity
and position and outer torque control.
Figure 1.1 SD3000 System Example
For information about: See page:
What is the ControlLogix Drive Module? 1-1
Connecting the Drive Module to SynchLink
and Drive Comm 1-3
Using Module Identification and Status
Information 1-5
Preventing Electrostatic Discharge 1-7
Removal and Insertion Under Power 1-7
Chapter Summary and What’s Next 1-8
Motor with
resolver
DPS with PMI
Chassis Drive Communication
ControlLogix Chassis
with Drive Module