Rockwell Automation 1756-DMF30 ControlLogix Drive Module User Manual
Page 267
Publication 1756-UM522B-EN-P - February 2003
1756-DMF30 Specific Information C-15
151
Logic Command
The controller-drive interface (as defined by the Controller
Commmunication Format), set bits to enable and disable
various functions and algorithms. Bits that are changed here
are reflected in parameter 152 [Applied LogicCmd]. Note: Bits
4 through 9 in Logic Command are NOT recalled from Control
EEprom. They will be cleared upon drive powerup or following
an EEprom recall operation.
Refer to Peak Detector/Control Logic on page C-4, the block
diagram shows the connection to the LogicCommand word, of
the Controller Communication Format, via parameter 600
[Integer In00].
Default:
0000 0000 0000 0000
Options
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bti 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
File:
Group:
Dynamic Control
Configuration
No.
Name
Description
Values