Rockwell Automation 1756-DMF30 ControlLogix Drive Module - Manual (Page 225)

Publication 1756-UM522B-EN-P - February 2003
1756-DMD30 Specific Information B-145
2130 Counter EMF
Displays the measured counter-EMF voltage, in volts. Units:
Default:
Min:
Max:
Type:
File:
Group: Volt
0
-32768
32767
Non-Linkable, Read Only, Floating Point
DPS/PMI
Feedback
2131 FML Feedback
Displays measured field current. A value of 4095 indicates hot
field current - equal to the value of parameter 2185 [Hot Field
Curr]. Units:
Default:
Min:
Max:
Type:
File:
Group: P.U.
0
-4095
4095
Non-Linkable, Read Only, 16-bit Integer
Speed/Posit Fdbk
Resolver
2132 Field Amps Fdbk
Displays measured field current in Amps. Units:
Default:
Min:
Max:
Type:
File:
Group: Amps
0
-32768
32767
Non-Linkable, Read Only, Floating Point
DPS/PMI
Feedback
2133 Field Volt Fdbk
Displays the field voltage feedback value, in volts. This voltage
is calculated based on the AC line voltage and field firing
angle. Units:
Default:
Min:
Max:
Type:
File:
Group: Volt
0
-32768
32767
Non-Linkable, Read Only, Floating Point
DPS/PMI
Feedback
2134 User Anlg Input
Displays the measured user analog input value from the
Resolver Feedback connector on the Resolver & Drive l/O
module. This value may be accessed through the PMI meter
ports. Default:
Min:
Max:
Type:
File:
Group: 0
-2048
2048
Non-Linkable, Read Only, 16-bit Integer
DPS/PMI
Feedback
2135 Res Scan Posit
Displays the electrical position of the resolver (if used). This
register is reset to zero at power-up. Default:
Min:
Max:
Type:
File:
Group: 0
-32768
32767
Non-Linkable, Read Only, 16-bit Integer
DPS/PMI, DPS/PMI
Feedback, Regulator Config
2136 Res Strobe Posit
Displays the electrical position of the resolver at the time a
strobe signal is detected. Default:
Min:
Max:
Type:
File:
Group: 0
-32768
32767
Non-Linkable, Read Only, 16-bit Integer
DPS/PMI
Regulator Config
2137 Arm Volt FB Cnts
Displays measured armature voltage. A value of 4095
indicates armature voltage - equal to Rated Armature voltage. Default:
Min:
Max:
Type:
File:
Group: 0
-4095
4095
Non-Linkable, Read Only, 16-bit Integer
DPS/PMI
Regulator Config
No. Name
Description Values