Rockwell Automation 1756-DMF30 ControlLogix Drive Module - Manual (Page 275)

Publication 1756-UM522B-EN-P - February 2003
1756-DMF30 Specific Information C-23
213 PkDtct1 In Real
Floating point input to the first peak/level detector
Default:
Min:
Max:
Type:
File:
Group: 0
-2200000000
2200000000
Linkable, Read-Write, Floating Point
Utility
Peak Detection
214 PeakDtct1 Preset
With the first detector (in set or hold modes) compares this
value to its input for level detection. When the detector trips
(in set mode) it transfers the value of this parameter to its
output.
Default:
Min:
Max:
Type:
File:
Group: 0
-2200000000
2200000000
Linkable, Read-Write, Floating Point
Utility
Peak Detection
215 PeakDetect1 Out
Output from the first peak/level detector.
Default:
Min:
Max:
Type:
File:
Group: 0
-2200000000
2200000000
Non-Linkable, Read-Only, Floating Point
Utility
Peak Detection
216 PeakDtct2 In Int
Integer input to second peak/level detector.
Default:
Min:
Max:
Type:
File:
Group: 0
-2147483648
2147483648
Linkable, Read-Write, 32-Bit Integer
Utility
Peak Detection
217 PkDtct2 In Real
Floating point input to second peak/level detector
Default:
Min:
Max:
Type:
File:
Group: 0
-2200000000
2200000000
Linkable, Read-Write, Floating Point
Utility
Peak Detection
218 PeakDtct2 Preset
With the second detector (in set or hold modes) compares this
value to its input for level detection. When the detector trips
(in set mode) it transfers the value of this parameter to its
output.
Default:
Min:
Max:
Type:
File:
Group: 0
-2200000000
2200000000
Linkable, Read-Write, Floating Point
Utility
Peak Detection
222 Motor Fdbk Sel
Enter or write a value to select the primary motor speed
feedback device.
Default: Val 0 Resolver
Options: Val 0
Val 1
Val 2
Val 3
Val 4
Val 5 Resolver
Analog Tach
Reserved
Reserved
Reserved
Reserved
File:
Group: Speed/Posit Fdbk
Feedback Config
No. Name
Description Values