Rockwell Automation 1756-DMF30 ControlLogix Drive Module - Manual (Page 62)

Publication 1756-UM522B-EN-P - February 2003
5-18 Configuring the Drive Module
Configure the Drive Module’s Peer Communication (continued)
Select parameters in the Drive
Module that will consume data
produced by tags in the controller.
Click the From
Controller tab
These links are part of the selected
Controller Communication Format.
They are not changeable.
This displays the Controller
Communication Format, chosen in
RSLogix 5000.
If you need to change the Controller
Communication Format, choose another
from the pull-down menu.
IMPORTANT
Conflicts between the DriveExecutive and RSLogix
5000 configurations cause communication faults.
Make sure the Controller Communication Format is
the same in DriveExecutive and RSLogix 5000 before
downloading.