Rockwell Automation 1756-DMF30 ControlLogix Drive Module - Manual (Page 181)

Publication 1756-UM522B-EN-P - February 2003
1756-DMD30 Specific Information B-101
1000 SL Node Cnfg
Set bits to configure the SynchLink node. Setting bit 0
configures the local node as the Time Master. Setting bit 2
configures the node to synchronize with the Time Master
immediately (1-2S per node) on power-up or recovery. If you do
not set bit 2, the node will stay in the fast mode, taking up to
36S per node to synchronize on power-up or recovery. Default: 0000 0000 0000 0000 0000 0000 0000 0100
Options: Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
Bit 16
Bit 17
Bit 18
Bit 19
Bit 20
Bit 21
Bit 22
Bit 23
Bit 24
Bit 25
Bit 26
Bit 27
Bit 28
Bit 29
Bit 30
Bit 31 Time Keeper
Reserved
Sync Now
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
File:
Group: SynchLink
SynchLink Config
1001 SynchLink Rev
Indicates the current revision of the local SynchLink
Programmable Logic Firmware. Default:
Min:
Max:
Type:
File:
Group: 0.1
0.1
999.9
Non-Linkable, Read Only, 16-bit Integer
Monitor
Drive Data
1002 SL System Rev
Indicates the system revision of the SynchLink network. To be
compatible on the network, all nodes must have the same
major revision. Default:
Min:
Max:
Type:
File:
Group: 0.001
0.001
999.999
Non-Linkable, Read Only, 32-bit Integer
Monitor
Drive Data
No. Name
Description Values