Rockwell Automation 1756-DMF30 ControlLogix Drive Module - Manual (Page 50)

Publication 1756-UM522B-EN-P - February 2003
5-6 Configuring the Drive Module
Checking and Updating the
DriveExecutive Database Checking the DriveExecutive Database
DriveExecutive must have a database for the Drive module firmware
revision and power module configuration, in order to configure the
module’s parameters and links. In addition, the database is required
for RSLogix and DriveExecutive to synchronize. Check the availability
of the database by attempting to create a new module with the
desired firmware revision level and power module configuration.
Select New from File
Menu
Select desired
Device Type
Click Next to move to
next page.