Rockwell Automation 1756-DMF30 ControlLogix Drive Module - Manual (Page 179)

Publication 1756-UM522B-EN-P - February 2003
1756-DMD30 Specific Information B-99
786 Xsync Status
Bit 0 will go high for 0.5ms latching the Sync Generator inputs
to the Sync Generator outputs. The period at which this bit is
set is determined by parameter 787 [Xsync Gen Period] Default: 0000 0000 0000 0000 0000 0000 0000 0000
Options: Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
Bit 16
Bit 17
Bit 18
Bit 19
Bit 20
Bit 21
Bit 22
Bit 23
Bit 24
Bit 25
Bit 26
Bit 27
Bit 28
Bit 29
Bit 30
Bit 31 Sync Pulse
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
File:
Group: Position Control
Sync Generator
787 Xsync Gen Period
Sets the period for the Sync Pulse Generator. Bit 0 of
parameter 786 [Xsync Status] will be set for 0.5 msec and will
be cleared for 0.5msec x 2[Xsync Gen Period]] - 0.5 msec. Default: Val 1 2 msec
Options: Val 0
Val 1
Val 2
Val 3
Val 4
Val 5
Val 6 1 msec
2 msec
3 msec
4 msec
8 msec
16 msec
32 msec
File:
Group: Position Control
Sync Generator
788 Xsync In 1
32 bit integer input of the Sync Generator. Latched to
parameter 789 [Xsync Out 1]. Link any 32 bit integer parameter
to this input parameter. Default:
Min:
Max:
Type:
File:
Group: 0
-2147483648
2147483648
Linkable, Read-Write, 32-bit Integer
Position Control
Sync Generator
No. Name
Description Values