Rockwell Automation 1756-DMF30 ControlLogix Drive Module User Manual

Page 139

Advertising
background image

Publication 1756-UM522B-EN-P - February 2003

1756-DMD30 Specific Information B-59

212

PeakDtct1 In Int
Integer input to the first peak/level detector.

Default:
Min:
Max:
Type:
File:
Group:

0
-2147483648
2147483648
Linkable, Read-Write, 32-bit Integer
Utility
Peak Detection

213

PkDtct1 In Real
Floating point input to the first peak/level detector

Default:
Min:
Max:
Type:
File:
Group:

0
-2200000000
2200000000
Linkable, Read-Write, Floating Point
Utility
Peak Detection

214

PeakDtct1 Preset
With the first detector (in set or hold modes) compares this
value to its input for level detection. When the detector trips
(in set mode) it transfers the value of this parameter to its
output.

Default:
Min:
Max:
Type:
File:
Group:

0
-2200000000
2200000000
Linkable, Read-Write, Floating Point
Utility
Peak Detection

215

PeakDetect1 Out
Output from the first peak/level detector.

Default:
Min:
Max:
Type:
File:
Group:

0
-2200000000
2200000000
Non-Linkable, Read Only, Floating Point
Utility
Peak Detection

216

PeakDtct2 In Int
Integer input to second peak/level detector.

Default:
Min:
Max:
Type:
File:
Group:

0
-2147483648
2147483648
Linkable, Read-Write, 32-bit Integer
Utility
Peak Detection

217

PkDtct2 In Real
Floating point input to second peak/level detector

Default:
Min:
Max:
Type:
File:
Group:

0
-2200000000
2200000000
Linkable, Read-Write, Floating Point
Utility
Peak Detection

218

PeakDtct2 Preset
With the second detector (in set or hold modes) compares this
value to its input for level detection. When the detector trips
(in set mode) it transfers the value of this parameter to its
output.

Default:
Min:
Max:
Type:
File:
Group:

0
-2200000000
2200000000
Linkable, Read-Write, Floating Point
Utility
Peak Detection

219

Spd Obs Trq Gain
Multiplication factor for the inertia input to the Speed
Observer. If the specified inertia differs from actual, this is
used to fine tune the inertia value input to the observer.
Normally set to 1.

Default:
Min:
Max:
Type:
File:
Group:

1
0
2
Linkable, Read-Write, Floating Point
Speed/Posit Fdbk
Feedback Config

No.

Name
Description

Values

Advertising
This manual is related to the following products: