Rockwell Automation 1756-DMF30 ControlLogix Drive Module User Manual
Page 268
Publication 1756-UM522B-EN-P - February 2003
C-16 1756-DMF30 Specific Information
152
Applied LogicCmd
Displays Logic Command that is applied to the Regulators and
Control Algorithms within the drive. Logic Commands come
from the 32-bit Logic Command found in a connection with the
Logix Controller.
Refer to Peak Detector/Control Logic on page C-4, the block
diagram shows the connection to the LogicCommand word, of
the Controller Communication Format, via parameter 600
[Integer In00].
Default:
0000 0000 0000 0000 0000 0000 0000 0000
Options
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bti 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
Bit 16
Bit 17
Bti 18
Bit 19
Bit 20
Bit 21
Bit 22
Bit 23
Bit 24
Bit 25
Bit 26
Bit 27
Bit 28
Bit 29
Bit 30
Bit 31
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Start
Reserved
Clear Fault
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Field En
Reserved
File:
Group:
Dynamic Control
Configuration
No.
Name
Description
Values