Nortel Networks 8000 User Manual
Page 128
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6 PPP and MP configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
Section
Description
using the MP-group
This section describes how to configure MP binding by
using MP-group.
See Example for binding MPs into the MP-group.
6.9 Configuring MP limiting
parameters
This section describes how to configure MP parameters.
This section describes how to configure the MP fragment
function.
This section describes how to maintain PPP and MP.
6.12 Configuration examples
This section provides several configuration examples of
PPP and MP.
6.13 Troubleshooting
This section describes how to diagnose and remove PPP
and MP faults.
6-2
Nortel Networks Inc.
Issue 5.3 (30 March 2009)