Preconfiguration tasks, Data preparation, Configuration procedures – Nortel Networks 8000 User Manual
Page 305: 2 configuring frame relay static address mapping
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration -WAN Access
8 Frame relay configuration
The FR static address mapping guarantees the stability of network links and improves the
network security by preventing attacks from unknown users.
Preconfiguration tasks
Before configuring the FR static address mapping, complete Configuring .
Data preparation
Before configuring the FR static address mapping, you need the following data.
No.
Data
1
Interface number and IP address of the FR interface
2
DLCI of the FR interface (optional)
Configuration procedures
No.
Procedure
1
Configuring frame relay static address mapping
2
8.3.2 Configuring frame relay static address mapping
Do as follows on the routers:
Step 1
Run:
system-view
The system view appears.
Step 2
Run:
interface interface-type interface-number[.subnumber ]
The FR interface view appears.
Step 3
Run:
fr map ip { ip-address [ mask ] | default } dlci-number [ broadcast [ ietf | nonstandard ] ]
The command creates a static mapping.
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
8-15