Data preparation, Configuration procedures, 2 configuring the call back – Nortel Networks 8000 User Manual

Page 145: 2 configuring the call back -19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Nortel Secure Router 8000 Series

Configuration -WAN Access

6 PPP and MP configuration

Data preparation

To configure PPP optional parameters, you need the following data.

No.

Data

1

Dialing number for calling back the router

2

Maximum RTP connections and the maximum TCP connections in the IPHC

function

3

PPP negotiation timeout interval

4

Polling interval

5

Addresses of the master DNS and the standby DNS server

6

Forbidden link quality percent and the restored link quality percent

Configuration procedures

No.

Procedure

1

Configuring the call back

2

Configuring packet or packet header compression

3

Configuring the timeout period of negotiation

4

Configuring the timeout period of polling

5

Configuring DNS server address negotiation

6

Configuring the PPP link quality detection

7

Configuring peer host router to be suppressed for adding into the local end direct

routing table

8

Checking the configuration

6.5.2 Configuring the call back

Do as follows on the routers:

Step 1

Run:

system-view

The system view appears.

Step 2

Run:

interface interface-type interface-number

The interface view appears.

Issue 5.3 (30 March 2009)

Nortel Networks Inc.

6-19

Advertising