Nortel Networks 8000 User Manual
Page 258
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration -WAN Access
7 LAPB and X.25 configuration
Interface: Serial1/0/0.2(protocol status is UP)
Ip address:ip 20.1.1.1
X.121 address:300
Map-type: SVC_MAP VC-number: 1
Facility:
Interface: Serial1/0/0.1(protocol status is UP)
Ip address:ip 10.1.1.1
X.121 address:200
Map-type: SVC_MAP VC-number: 1
Facility:
# Display the VC information about Router A
<RouterA> display x25 vc
Interface: Serial1/0/0.2
SVC 1
State: P4
Map: ip 20. 1. 1. 1 to 300
Window size: input 2 output 2
Packet Size: input 128 output 128
Local PS: 2 Local PR: 2 Remote PS: 1 Remote PR: 2
Local Busy: FALSE Reset times:
0
Input/Output:
DATA 10/10 INTERRUPT 0/0
RR 2/0 RNR 0/0 REJ 0/0
Bytes 840/840
Snd Queue(Current/Max):
0/200
Interface: Serial1/0/0.1
SVC 2
State: P4
Map: ip 10. 1. 1. 1 to 200
Window size: input 2 output 2
Packet Size: input 128 output 128
Local PS: 2 Local PR: 2 Remote PS: 1 Remote PR: 2
Local Busy: FALSE Reset times:
0
Input/Output:
DATA 10/10 INTERRUPT 0/0
RR 2/0 RNR 0/0 REJ 0/0
Bytes 840/840
Snd Queue(Current/Max):
0/200
# Display information about the X25 switching.
<RouterD> display x25 switch-table svc static
Number Destination Substitute-src Substitute-dst CUD
SwitchTo(type/name)
100
200
300
I/Serial1/0/0
I/Serial1/0/1
I/Serial1/0/2
Total of static svc is 3.
The item type of SwitchTo meaning:
I: interface H: hunt-group T: xot
<RouterD> display x25 switch-table svc dynamic
#1
(In: Serial1/0/2 - SVC1024) <—> (Out: Serial1/0/0
#2
(In: Serial1/0/1 - SVC1024) <—> (Out: Serial1/0/0
—End
SVC1
SVC2
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
7-55