Configuration procedure, Configuration files – Nortel Networks 8000 User Manual
Page 362
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8 Frame relay configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
Configuration procedure
Step 1
Configure Router A.
# Create and configure MFR 4/0/100.
<RouterA> system-view
[RouterA] interface mfr 4/0/100
[RouterA-MFR4/0/100] ip address 10.1.1.1 255.255.255.0
[RouterA-MFR4/0/100] fr interface-type dte
[RouterA-MFR4/0/100] quit
# Bind Serial4/0/0 and Serial4/0/1 into MFR 4/0/100.
[RouterA] interface serial 4/0/0
[RouterA-Serial4/0/0] link-protocol fr mfr 4/0/100
[RouterA-Serial4/0/0] quit
[RouterA] interface serial 4/0/1
[RouterA-Serial4/0/1] link-protocol fr mfr 4/0/100
[RouterA-Serial4/0/1] quit
Step 2
Configure Router B.
# Create and configure MFR 4/0/200.
<RouterB> system-view
[RouterB] interface mfr 4/0/200
[RouterB-MFR4/0/200] ip address 10.1.1.2 255.255.255.0
[RouterB-MFR4/0/200] fr interface-type dce
[RouterB-MFR4/0/200] fr dlci 100
[RouterB-fr-dlci-MFR4/0/200-100] quit
[RouterB-MFR4/0/200] quit
# Bind Serial4/0/0 and Serial4/0/1 into MFR 4/0/200.
[RouterB] interface serial 4/0/0
[RouterB-Serial4/0/0] link-protocol fr mfr 4/0/200
[RouterB-Serial4/0/0] quit
[RouterB] interface serial 4/0/1
[RouterB-Serial4/0/1] link-protocol fr mfr 4/0/200
[RouterB-Serial4/0/1] quit
—End
Configuration files
•
Configuration file of Router A
#
sysname RouterA
#
interface Serial4/0/0
link-protocol fr MFR4/0/100
#
interface Serial4/0/1
link-protocol fr MFR4/0/100
#
interface MFR4/0/100
ip address 10.1.1.1 255.255.255.0
8-72
Nortel Networks Inc.
Issue 5.3 (30 March 2009)