Nortel Networks 8000 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration -WAN Access
1 WAN access overview
Interface
Command Line
View
Command
Prompt
CT1 interface
CT1 interface
view
Run the
controller t1
1/0/0 command in the
system view.
[Nortel-Tl 1/0/0]
CE3 interface
CE3 interface
view
Run the
controller e3
1/0/0 command in the
system view.
[Nortel-E3 1/0/0]
POS interface
POS interface
view
Run the
interface pos
3/0/0 command in the
system view.
[Nortel-Pos 3/0/0]
CPOS interface
CPOS interface
view
Run the
controller
cpos 3/0/0 command
in the system view.
[Nortel-Cpos 3/0/0]
ATM interface
ATM interface
view
Run the
interface
atm 2/0/0 command
in the system view.
[Nortel-Atm 2/0/0]
Table 1-2 Command line views and prompts of WAN logical interfaces
Interface
Command Line
View
Command
Prompt
Sub-interface
Sub-interface
view
Run the
interface atm
1/0/0.1 command
in the system
view.
[Nortel-Atml1/0/0.1]
Virtual-Template
interface
Virtual-Template
interface view
Run the
interface
virtual-template
0 command in
the system view.
[Nortel-Virtual-Template0
]
MP-group interface
MP-group
interface view
Run the
interface mp
group 0/0/1 in
the system view.
[Nortel-Mp-group0/0/1]
Virtual-Ethernet
interface
Virtual-Ethernet
interface view
Run the
interface
virtual-ethernet
0/0/1 command
in the system
view.
[Nortel-Virtual-Ethernet0/
0/1]
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
1-3