Nortel Networks 8000 User Manual

Page 89

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

4 POS and CPOS interface configuration

Nortel Secure Router 8000 Series

Configuration -WAN Access

# Configure POS 1/0/0. The clock mode is slave.

<RouterA> system-view

[RouterA] interface pos 1/0/0

[RouterA-Pos1/0/0] ip address 10.110.1.10 255.255.255.0

Step 2 Configure Router B.

# Configure POS 4/0/0, set clock mode the master modeas slave while all other physical

parameters use default values.

<RouterB> system-view

[RouterB] interface pos 4/0/0

[RouterB-Pos4/0/0] clock master

[RouterB-Pos4/0/0] ip address 10.110.1.11 255.255.255.0

Step 3 Check the configuration.

Use the

display interface pos command to check the connectivity of POS interfaces on

Router A.

<RouterA> display interface pos 1/0/0

Pos1/0/0 current state : UP

Line protocol current state : UP

Description : NORTEL, Nortel Series, Pos1/0/0 Interface

The Maximum Transmit Unit is 4470 bytes, Hold timer is 10(sec)

Internet Address is 10.110.1.10/24

Link layer protocol is PPP

LCP opened, IPCP opened, MPLSCP opened

Physical layer is POS over STM-1

Scramble enabled, crc 32, clock master, loopback not set

Port 0 :

Hardware is POS155

OPTICAL MODULE IS NOT INSTALLED

Output queue : (Urgent queue : Size/Length/Discards) 0/50/0

Output queue : (Protocol queue : Size/Length/Discards) 0/1000/0

Output queue : (FIFO queue : Size/Length/Discards) 0/256/0

Traffic statistics:

Last 300 seconds input rate 0 bytes/sec, 0 packets/sec

Last 300 seconds output rate 0 bytes/sec, 0 packets/sec

Usage of input bandwidth:0.00%,Usage of output bandwidth:0.00%

Input: 0 packets, 0 bytes

0 errors, 0 CRC, 0 packets too long

Output: 0 packets, 0 bytes, 0 underruns

0 CRC, 0 aborted sequences, 0 packets too long

Use the

ping command to check the network connectivity.

RouterA]

ping 10.110.1 .11

PING 10

110. 1.11: 56

data bytes, press CTRL

C to break

Reply from 10.110.1. 11: bytes=56

Sequence=1

ttl=255

time=3

ms

Reply from 10.110.1. 11: bytes=56

Sequence=2

ttl=255

time=2

ms

Reply from 10.110.1. 11: bytes=56

Sequence=3

ttl=255

time=2

ms

Reply from 10.110.1. 11: bytes=56

Sequence=4

ttl=255

time=2

ms

Reply from 10.110.1. 11: bytes=56

Sequence=5

ttl=255

time=2

ms

-- 10.110.1.11 ping statistics ----

4-28

Nortel Networks Inc.

Issue 5.3 (30 March 2009)

Advertising