1 establishing the configuration task, Applicable environment, Preconfiguration tasks – Nortel Networks 8000 User Manual

Page 412: Data preparation, 1 establishing the configuration task -13, 7 configuring the, Pppoeoa application

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

10 Low-speed ATM configuration

Nortel Secure Router 8000 Series

Configuration -WAN Access

Action

Command

Check information about the

PVC mapping.

display atm map-info

[

interface

interface-type

interface-number [ .subinterface ] [

pvc

{ pvc-name

[ vpi/vci ] | vpi/vci } ] ]

10.8 Creating a PVC-group and configuring the PVC

service mapping

10.8.1 Establishing the configuration task

Applicable environment

A PVC-group is a group of PVCs that carry different services. The PVC-groups provide a
better quality of service.

The PVC service mapping enables different PVCs to carry packets that have different

priorities, between two IP addresses.

Preconfiguration tasks

Before creating a PVC-group and configuring PVC service mapping, complete the following

tasks:

Configuring physical attributes for the ATM interface

• Configuring an IP address and mask for the ATM interface or sub-interface

Creating a PVC and configuring the application mode

Data preparation

To create a PVC-group and configure PVC service mapping, you need the following data.

No.

Data

1

Number of the ATM interface or the sub-interface

2

IP address and mask of the ATM interface or sub-interface

3

PVC name or network VPI and VCI of a PVC-Group

4

PVC name or VPI and VCI of a PVC-Group

5

The highest and lowest precedence of the IP packets over PVC in a PVC-Group

10-26

Nortel Networks Inc.

Issue 5.3 (30 March 2009)

Advertising