3 configuring the mfr sliding window size, 3 configuring the mfr sliding window size -43 – Nortel Networks 8000 User Manual
Page 333
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration -WAN Access
8 Frame relay configuration
Configuring the MFR fragment size in the MFR interface view
Do as follows on the routers:
Step 1
Run:
system-view
The system view appears.
Step 2
Run:
interface mfr interface-number
The MFR interface view appears.
Step 3
Run:
mfr fragment
The command enables the MFR fragmentation.
Step 4
Run:
mfr fragment-size bytes
The command configures the maximum fragment permitted by bundle links.
By default, the maximum fragment is of 300 bytes.
After enabling the fragment function on the MFR interface, the bundle link first uses the
fragment size you configured in the FR interface view. If there is no configuration in the FR
interface view, it uses the fragment size configured in the MFR interface view.
—End
8.12.3 Configuring the MFR sliding window size
Do as follows on the routers:
Step 1
Run:
system-view
The system view appears.
Step 2
Run:
interface mfr interface-number
The command creates the MFR interface and the MFR interface view appears.
Step 3
Run:
mfr window-size number
The command configures the MFR sliding window size.
By default, the size of MFR sliding window is equal to the number of physical interfaces
bundled by MFR.
—End
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
8-43